Cascade Crew

91RSVert · Posted: Wed May 23, 2007 4:26 am Post subject: misc parts WTB, mostly TPI

looking for some parts, no major hurry. Price is more an issue then finding or time. All for 91 Camaro

36mm Front sway
black door sill plate
right side GM power lock
pwr window switch
2 left, and 2 right 82-87?? style tail lights. 2 could be broke in certin areas.

TPI Parts:
91-92 harness
custom burned prom to fit moates G3 adaptor to get me started
used stuff to burn my own chips

blue89 · Posted: Wed May 23, 2007 7:17 am Post subject:

Kurfbird might have a lot of these parts. He JUST sold a TPI unit and is in the market of scraping 3rd gens.

aaron_sK · Posted: Wed May 23, 2007 7:38 am Post subject: Re: misc parts WTB, mostly TPI

kurfbird · Posted: Wed May 23, 2007 7:41 am Post subject: Parts

I am not in the market to scraping third gens Wink

. But I do have some parts.

I only have the throttle bracket for the TPI. Everything else is gone. Sorry.

91RSVert · Posted: Wed May 23, 2007 9:37 am Post subject: Re: misc parts WTB, mostly TPI

91RSVert · Posted: Wed May 23, 2007 9:39 am Post subject: Re: Parts

Dewey316 · Posted: Wed May 23, 2007 9:47 am Post subject:

I have couple of tail-lights that are the late model RS type, with the black stripe. Not exactly the same as the early ones, but clsoe.

kurfbird · Posted: Wed May 23, 2007 9:57 am Post subject: Parts

I might have the aucator and power mirror switch. I will check tonight and get back to you.

kurfbird · Posted: Wed May 23, 2007 10:00 am Post subject: Actuator

You might want to take you door panels off and lubricatre everything really well. Mine was doing that and I used some spray lub and now it works great.

ALso the actuator peices that goes on the door rod inside the door itself spreads out over time. I took mine off and pinched it back together with vice gripes and that helped alot.

91RSVert · Posted: Wed May 23, 2007 11:02 am Post subject: Re: Parts

kurfbird · Posted: Wed May 23, 2007 11:58 am Post subject: Door linkage.

Look where the linkage goes into the lock actuator. Looks like a Y peice of emtal with a clamp like opening

91RSVert · Posted: Thu May 24, 2007 3:53 am Post subject:

ok, will look at this tonight.

91RSVert · Posted: Thu May 24, 2007 5:43 pm Post subject:

ok, I see what you mean on spreads out. Its no bigger then the left side. Since I was spraying primer tonight, I didnt want to pull out any grease items. Will do that before it goes back together.

And I found a tpi setup. Its missing the wireharness, so thats all I need anymore.

kurfbird · Posted: Thu May 24, 2007 5:52 pm Post subject: Lock Actuator

Grease and oil everything up. I used Yield spray lub and mine started working great. And I had the same problem at different times.