Cascade Crew

iansane · Posted: Tue Oct 19, 2010 9:49 pm Post subject: Metal glue?

So the frame of my hood has almost completely separated from the outer skin. Is there some epoxy/glue/paper mache/plasterofparis that you guys have used that I could reattached? Would the process just be clean real well+glue+pray? Very Happy

Whiskeychick · Posted: Tue Oct 19, 2010 10:20 pm Post subject:

Yes there are a few glues you can use. One I have in mind is used for gluing truck boxsides on lol, no worries about it coming apart again.
There is a fast, medium and slow too so you have time to work with it.

All, you need to do is make sure the surface is free of oils/grease etc goop it in, and hold it in place (with fast about 30 seconds)

Will find out the name tomorrow sorry cant remember off the top of my head

Whiskeychick · Posted: Tue Oct 19, 2010 10:31 pm Post subject:

http://www.autobodysupply.net/product-p/duramix4179.htm

That is one of them. 3M Duramix Smile

And we have another one that works really well at the shop, Ill look tomorrow for ya.

And if you cant find them anywhere over the counter, I can help ya out.

iansane · Posted: Tue Oct 19, 2010 10:37 pm Post subject:

chevymad · Posted: Tue Oct 19, 2010 10:56 pm Post subject:

I dont think i've ever ran into a bad 3M product.

Whiskeychick · Posted: Wed Oct 20, 2010 9:06 am Post subject:

Ya 3M is awesome.

The one I was thinking of was LORD Fusor, 108B. or 110B (fast and medium) works the same way really good product ive used it on my GTA.

Might be a bit cheaper then 3M as well.

IROCDave · Posted: Thu Oct 21, 2010 5:23 pm Post subject:

Ian, I have a mig welder, bottles and wire if needed....No paint gun though Very Happy

BluFbdy · Posted: Sat Oct 23, 2010 1:57 am Post subject:

iansane · Posted: Sat Oct 23, 2010 9:52 am Post subject: