View previous topic :: View next topic |
Author |
Message |
Al Hasse Member
Joined: 19 Nov 2005 Posts: 4379 Location: Bremerton, WA
1992 Chevrolet Camaro RS
|
Posted: Tue Sep 08, 2009 8:38 pm Post subject: |
|
|
Twilightoptics wrote: | Ooooh Ooooh Ooooh Mazda needs better amps. HEHE Believe me! Dibs after Skyler! |
It's not much of an amp, just 40W X 2 or 100W X 1 if you bridge it. Only has a 20 amp fuse, so my guess would be 250W max before you blow it up. Apparently was used to drive the woofer and the other 4 speakers used deck power (stamped 30W each on the magnets). |
|
Back to top |
|
|
alloy T56 Elitist
Joined: 25 Jan 2004 Posts: 1716 Location: Vancouver, WA
1987 Chevrolet Camaro IROC-Z
|
Posted: Tue Sep 08, 2009 9:02 pm Post subject: |
|
|
So, can just anyone come to this shindig..................and maybe bring a friend, or does it take a bribe to get an invite _________________ Member of the "Elite T56 Club" , big brake club, and "burgundy" (not red or maroon) car owner.
www.t5cablespeedometer.com
www.t56cablespeedometer.com
Ronald Reagan: "Most of us wonder if our lives made any difference. Marines don't have that problem." |
|
Back to top |
|
|
fiveoformula Member
Joined: 08 Aug 2007 Posts: 1799 Location: OR
1988 Pontiac Formula
|
Posted: Tue Sep 08, 2009 10:26 pm Post subject: |
|
|
Hey, sounds pretty booked for car projects, but would anyone be up for a little soldering on my ECM?
If not I could still go to hang. _________________
'88 FORMULA |
|
Back to top |
|
|
Al Hasse Member
Joined: 19 Nov 2005 Posts: 4379 Location: Bremerton, WA
1992 Chevrolet Camaro RS
|
Posted: Tue Sep 08, 2009 10:45 pm Post subject: |
|
|
fiveoformula wrote: | Hey, sounds pretty booked for car projects, but would anyone be up for a little soldering on my ECM?
If not I could still go to hang. |
I might be able to do that for you, pretty easy. I have a small butane solder iron. If this is to install a socket, I'll need a solder sucker, Radio Shack should have one, looks like a spring loaded syringe.
It's a vacuum desoldering tool
|
|
Back to top |
|
|
fiveoformula Member
Joined: 08 Aug 2007 Posts: 1799 Location: OR
1988 Pontiac Formula
|
Posted: Tue Sep 08, 2009 11:00 pm Post subject: |
|
|
Bet that makes the desoldering pretty easy. lol about how much do those run? |
|
Back to top |
|
|
Al Hasse Member
Joined: 19 Nov 2005 Posts: 4379 Location: Bremerton, WA
1992 Chevrolet Camaro RS
|
Posted: Tue Sep 08, 2009 11:05 pm Post subject: |
|
|
You should see the ones I have at work Too bad they're not portable.
That one runs about $10 at the shack. |
|
Back to top |
|
|
fiveoformula Member
Joined: 08 Aug 2007 Posts: 1799 Location: OR
1988 Pontiac Formula
|
Posted: Tue Sep 08, 2009 11:12 pm Post subject: |
|
|
Thats not bad at all, I could pick one up and have it for the weekend.
That way maybe I could have a tune before the end of summer |
|
Back to top |
|
|
lostinconformiti Member
Joined: 18 May 2008 Posts: 146 Location: Vancouver,Wa
|
Posted: Wed Sep 09, 2009 2:37 am Post subject: |
|
|
alloy wrote: | So, can just anyone come to this shindig..................and maybe bring a friend, or does it take a bribe to get an invite |
2nded! i got the weekend off and id like to meet ya'll crewbies! |
|
Back to top |
|
|
rjmcgee The Hammer
Joined: 08 Jan 2004 Posts: 2320
|
Posted: Wed Sep 09, 2009 6:04 am Post subject: |
|
|
I'll be in Portland Friday, but I probably shouldn't try and get to your house with the truck. |
|
Back to top |
|
|
Twilightoptics Hardcore (12sec Club)
Joined: 13 Jan 2004 Posts: 9191 Location: Auburn , WA
1987 Chevrolet Camaro IROC-Z
|
Posted: Wed Sep 09, 2009 6:30 am Post subject: |
|
|
Al Hasse wrote: | fiveoformula wrote: | Hey, sounds pretty booked for car projects, but would anyone be up for a little soldering on my ECM?
If not I could still go to hang. |
I might be able to do that for you, pretty easy. I have a small butane solder iron. If this is to install a socket, I'll need a solder sucker, Radio Shack should have one, looks like a spring loaded syringe.
It's a vacuum desoldering tool
|
Got one. Putting a ZIF on your ECM? _________________ A redline a day keeps the carbon away! |
|
Back to top |
|
|
Dewey316 The Lama
Joined: 08 Jan 2004 Posts: 7295 Location: Bringing the tech
1990 Chevrolet Camaro RS
|
Posted: Wed Sep 09, 2009 6:35 am Post subject: |
|
|
I'll be there saturday for sure. Friday is a maybe. _________________
"Ever see a Motorcycle in front of a Psychiatrists Office?" Me neither |
|
Back to top |
|
|
Twilightoptics Hardcore (12sec Club)
Joined: 13 Jan 2004 Posts: 9191 Location: Auburn , WA
1987 Chevrolet Camaro IROC-Z
|
Posted: Wed Sep 09, 2009 6:48 am Post subject: |
|
|
rjmcgee wrote: | I'll be in Portland Friday, but I probably shouldn't try and get to your house with the truck. |
There is a large gravel church parking lot on the main road if you wanted to stop by. How longs the truck? _________________ A redline a day keeps the carbon away! |
|
Back to top |
|
|
rjmcgee The Hammer
Joined: 08 Jan 2004 Posts: 2320
|
Posted: Wed Sep 09, 2009 8:05 am Post subject: |
|
|
Twilightoptics wrote: | rjmcgee wrote: | I'll be in Portland Friday, but I probably shouldn't try and get to your house with the truck. |
There is a large gravel church parking lot on the main road if you wanted to stop by. How longs the truck? |
65 feet, I would be more concerned with getting there through the residential areas. |
|
Back to top |
|
|
Al Hasse Member
Joined: 19 Nov 2005 Posts: 4379 Location: Bremerton, WA
1992 Chevrolet Camaro RS
|
Posted: Wed Sep 09, 2009 8:42 am Post subject: |
|
|
Twilightoptics wrote: | Al Hasse wrote: | fiveoformula wrote: | Hey, sounds pretty booked for car projects, but would anyone be up for a little soldering on my ECM?
If not I could still go to hang. |
I might be able to do that for you, pretty easy. I have a small butane solder iron. If this is to install a socket, I'll need a solder sucker, Radio Shack should have one, looks like a spring loaded syringe.
It's a vacuum desoldering tool
|
Got one. Putting a ZIF on your ECM? |
Cool, sounds looks like about everything needed - ZIF or adapter socket, same process.
I'm thinking of doing R-Bob's EBL after I get paid for this business trip coming up, flight time alone should cover it. I love overtime when it's just sitting on a plane time & 1/2 on Saturday and doubletime when it runs into Sunday |
|
Back to top |
|
|
TurdGen1989 Member
Joined: 30 Aug 2009 Posts: 472 Location: Roseburg,OR
|
Posted: Wed Sep 09, 2009 9:23 am Post subject: |
|
|
ok so where exactly is this taking place at? _________________ Phil.
GMC High Sierra
|
|
Back to top |
|
|
brandyland Member
Joined: 21 Feb 2008 Posts: 343 Location: Brandyland, WA
|
Posted: Wed Sep 09, 2009 9:47 am Post subject: |
|
|
rjmcgee wrote: | Twilightoptics wrote: | rjmcgee wrote: | I'll be in Portland Friday, but I probably shouldn't try and get to your house with the truck. |
There is a large gravel church parking lot on the main road if you wanted to stop by. How longs the truck? |
65 feet, I would be more concerned with getting there through the residential areas. |
Actually Rod, there's plenty of places along St Johns to park the truck. Lots of other big trucks along there if you wanna come over. _________________ Picture of 'Scort goes here |
|
Back to top |
|
|
brandyland Member
Joined: 21 Feb 2008 Posts: 343 Location: Brandyland, WA
|
Posted: Wed Sep 09, 2009 9:48 am Post subject: |
|
|
TurdGen1989 wrote: | ok so where exactly is this taking place at? |
Vancouver.
PM for directions. _________________ Picture of 'Scort goes here |
|
Back to top |
|
|
Twilightoptics Hardcore (12sec Club)
Joined: 13 Jan 2004 Posts: 9191 Location: Auburn , WA
1987 Chevrolet Camaro IROC-Z
|
Posted: Wed Sep 09, 2009 10:18 am Post subject: |
|
|
alloy wrote: | So, can just anyone come to this shindig..................and maybe bring a friend, or does it take a bribe to get an invite |
You're always welcome to come Dan! You don't even NEED an invitation! _________________ A redline a day keeps the carbon away! |
|
Back to top |
|
|
brandyland Member
Joined: 21 Feb 2008 Posts: 343 Location: Brandyland, WA
|
Posted: Wed Sep 09, 2009 10:41 am Post subject: |
|
|
Twilightoptics wrote: | alloy wrote: | So, can just anyone come to this shindig..................and maybe bring a friend, or does it take a bribe to get an invite |
You're always welcome to come Dan! You don't even NEED an invitation! |
But bribes always welcome.
_________________ Picture of 'Scort goes here |
|
Back to top |
|
|
Richster Magic Fingers
Joined: 06 Oct 2008 Posts: 879 Location: The Black-Hole
1983 Pontiac Trans Am
|
Posted: Wed Sep 09, 2009 11:01 am Post subject: |
|
|
Hey Brandy and Paul, so it's ok to show up before 5 or so??
It sounds like you guys will be around most of the day?
Would dig rolling over and say hello...
Thanks! _________________
|
|
Back to top |
|
|
|