Cascade Crew

91RSVert · Posted: Wed Jul 02, 2008 9:47 am Post subject: Woot, New VC's

Ok, now looking at these. I'm going to have to lengthen my PVC hose arnt I? Cause its in the rear. I thought the vettes had the same base as ours. So why isnt it matching up? Or did they have a longer hose?

And now I get to add another car to my list of cars I have parts from Laughing

aaron_sK · Posted: Wed Jul 02, 2008 10:07 am Post subject:

IIRC the PCV valve was in the same place, the oil fill moved from the drivers rear to the passenger front, and they added the silly Corvette logo where the Camaro oil fill was.

*Edit: Stock with Camaro-style PCV:

91RSVert · Posted: Wed Jul 02, 2008 10:32 am Post subject:

oh, so they do have a pre-bent longer hose.

ok, time to fab something up

aaron_sK · Posted: Wed Jul 02, 2008 12:36 pm Post subject:

Should be able to grab that hose off any TPI Camaro. I just noticed in your garage pics that you're using aftermarket valve covers with a breather.

91RSVert · Posted: Wed Jul 02, 2008 5:10 pm Post subject:

the problem being, In the 5 years I have owned a camaro. There have never been a TPI one in the parts yard. Also, my friends 305TPI has his pvc in the rear of the drivers cover. Where that emblem is.

Hopefully I can come up with a pre-bent tube off of some car, or make my own.

iansane · Posted: Wed Jul 02, 2008 8:52 pm Post subject:

Why do you need pre bent?

91RSVert · Posted: Thu Jul 03, 2008 2:38 am Post subject:

to get that nice s shape.

iansane · Posted: Thu Jul 03, 2008 7:44 am Post subject:

So, aesthetics?

91RSVert · Posted: Thu Jul 03, 2008 8:39 am Post subject:

Yeppers. Cause the ones I have now, just have a regular hose and it looks like crap. It also causes the pvc to not fit right in the rubber boot.