| View previous topic :: View next topic |
| Author |
Message |
turbo_jimi Member

Joined: 23 Feb 2004 Posts: 1206 Location: Tacoma
1985 Chevrolet Camaro Z/28
|
Posted: Sun Aug 21, 2011 8:04 pm Post subject: carpet installed, now heater doesnt work |
|
|
The black n gray combo doesnt look too bad, but now i need to trouble shoot my heater fan and left rear speaker _________________
1985 Z28 Crate 350, Hurst T-5, 3.23s, Flowmaster Under previous set-up: 143.82 rwhp 216.98 lbs. torque @4390 rpms 3/12/11 |
|
| Back to top |
|
 |
aaron_sK Member
Joined: 23 Jan 2006 Posts: 8834 Location: Back in beautiful Tacompton
1987 Chevrolet Camaro IROC-Z
|
Posted: Sun Aug 21, 2011 8:11 pm Post subject: |
|
|
Speaker wires come up one side and then cross over at the b-pillar. I forget which way they go, but fortunately I have a car with no carpet so I can check for you.
Heater is a molded triple-wire unit, blue yellow and orange, that comes from the HVAC control and heads through the firewall on the passenger side. |
|
| Back to top |
|
 |
turbo_jimi Member

Joined: 23 Feb 2004 Posts: 1206 Location: Tacoma
1985 Chevrolet Camaro Z/28
|
Posted: Sun Aug 21, 2011 8:18 pm Post subject: |
|
|
I probably pulled a wire loose, need to clean the controls anyways. _________________
1985 Z28 Crate 350, Hurst T-5, 3.23s, Flowmaster Under previous set-up: 143.82 rwhp 216.98 lbs. torque @4390 rpms 3/12/11 |
|
| Back to top |
|
 |
turbo_jimi Member

Joined: 23 Feb 2004 Posts: 1206 Location: Tacoma
1985 Chevrolet Camaro Z/28
|
Posted: Mon Aug 29, 2011 8:17 pm Post subject: |
|
|
Got the fan working again...changed the fuse and cleaned the connections and is started working again...still don't have "high" but the next one up works and that's where it's staying.  _________________
1985 Z28 Crate 350, Hurst T-5, 3.23s, Flowmaster Under previous set-up: 143.82 rwhp 216.98 lbs. torque @4390 rpms 3/12/11 |
|
| Back to top |
|
 |
Al Hasse Member

Joined: 19 Nov 2005 Posts: 4379 Location: Bremerton, WA
1992 Chevrolet Camaro RS
|
Posted: Mon Aug 29, 2011 8:22 pm Post subject: |
|
|
Maybe the high speed relay. All other speeds go through the resistor network. _________________ 92 Camaro
89 Camaro
 |
|
| Back to top |
|
 |
aaron_sK Member
Joined: 23 Jan 2006 Posts: 8834 Location: Back in beautiful Tacompton
1987 Chevrolet Camaro IROC-Z
|
Posted: Mon Aug 29, 2011 8:23 pm Post subject: |
|
|
| Is this an A/C car, or a factory delete car? Only A/C cars got the relay, and it only works if you kept your A/C harness when you deleted the rest of it. |
|
| Back to top |
|
 |
turbo_jimi Member

Joined: 23 Feb 2004 Posts: 1206 Location: Tacoma
1985 Chevrolet Camaro Z/28
|
Posted: Mon Aug 29, 2011 8:25 pm Post subject: |
|
|
It was an A/C car that I converted years ago and I have the relay...a cube that the wires run through. _________________
1985 Z28 Crate 350, Hurst T-5, 3.23s, Flowmaster Under previous set-up: 143.82 rwhp 216.98 lbs. torque @4390 rpms 3/12/11 |
|
| Back to top |
|
 |
aaron_sK Member
Joined: 23 Jan 2006 Posts: 8834 Location: Back in beautiful Tacompton
1987 Chevrolet Camaro IROC-Z
|
Posted: Mon Aug 29, 2011 8:27 pm Post subject: |
|
|
| Try pulling the relay off and jumping the harness with a lead. |
|
| Back to top |
|
 |
turbo_jimi Member

Joined: 23 Feb 2004 Posts: 1206 Location: Tacoma
1985 Chevrolet Camaro Z/28
|
Posted: Mon Aug 29, 2011 8:34 pm Post subject: |
|
|
I'll try that tomorrow. Thanks. _________________
1985 Z28 Crate 350, Hurst T-5, 3.23s, Flowmaster Under previous set-up: 143.82 rwhp 216.98 lbs. torque @4390 rpms 3/12/11 |
|
| Back to top |
|
 |
turbo_jimi Member

Joined: 23 Feb 2004 Posts: 1206 Location: Tacoma
1985 Chevrolet Camaro Z/28
|
Posted: Wed Sep 21, 2011 6:26 pm Post subject: |
|
|
Figured the out Left Rear speaker...blown. And it was fairly new. Ended up swapping it out for a really old Sony 3-way that originally came in John's (RSFreak) 83 Z28 around '94 or '95 when he bought it. Works great for my musical needs.  _________________
1985 Z28 Crate 350, Hurst T-5, 3.23s, Flowmaster Under previous set-up: 143.82 rwhp 216.98 lbs. torque @4390 rpms 3/12/11 |
|
| Back to top |
|
 |
|