| View previous topic :: View next topic |
| Author |
Message |
aaron_sK Member
Joined: 23 Jan 2006 Posts: 8834 Location: Back in beautiful Tacompton
1987 Chevrolet Camaro IROC-Z
|
Posted: Fri Sep 18, 2009 7:21 pm Post subject: Last call for free junk |
|
|
I'm moving (again), and this stuff will go to the dump or recyclers soon if not claimed:
Complete V6 intake off of a 3.1L. I have upper and lower plenums, as well as the manifold base.
Throttle body for 3.1L. Has all sensors. Don't know if they work.
Injector harness for 3.1 car. Has different plug on the harness end than the 2.8 cars for some stupid reason.
ECM from 3.1 car. Don't remember the number.
Fuel rail for 2.8 car. Injectors are clogged or bad or something is wrong with the regulator, I don't know. Replacement was cheaper than diagnosis.
Front lowering springs. Some old-school brand, 'Suspension Technologies' or something like that. Got around 15K on them AFAIK.
All free. All for pickup in Spanaway, WA.
Come on guys, save this junk from being crushed and made into Kia's! |
|
| Back to top |
|
 |
91camaro_rs Member

Joined: 03 Dec 2008 Posts: 1712 Location: Fox Island, Wa
1991 Chevrolet Camaro RS
|
Posted: Fri Sep 18, 2009 8:55 pm Post subject: |
|
|
| ill take those lowering springs please, ill be over in spanaway tomorrow can i pick them up then? |
|
| Back to top |
|
 |
aaron_sK Member
Joined: 23 Jan 2006 Posts: 8834 Location: Back in beautiful Tacompton
1987 Chevrolet Camaro IROC-Z
|
Posted: Fri Sep 18, 2009 11:59 pm Post subject: |
|
|
| That works. Call first. I'll be around somewhere. |
|
| Back to top |
|
 |
91RSVert Member
Joined: 16 May 2007 Posts: 2736 Location: AR
1991 Chevrolet Camaro RS
|
Posted: Sat Sep 19, 2009 5:35 am Post subject: |
|
|
The ecm is a 7730, which is the same as a TPI, just needs a prom.
Does the injector harness have numbers on them? 1,2,3,etc? |
|
| Back to top |
|
 |
aaron_sK Member
Joined: 23 Jan 2006 Posts: 8834 Location: Back in beautiful Tacompton
1987 Chevrolet Camaro IROC-Z
|
Posted: Sat Sep 19, 2009 7:42 am Post subject: |
|
|
| 91RSVert wrote: | | Does the injector harness have numbers on them? 1,2,3,etc? |
I don't think so. I didn't mark it before I pulled it because it basically only goes on one way. |
|
| Back to top |
|
 |
Al Hasse Member

Joined: 19 Nov 2005 Posts: 4379 Location: Bremerton, WA
1992 Chevrolet Camaro RS
|
Posted: Sat Sep 19, 2009 9:54 am Post subject: |
|
|
| aaron_sK wrote: | | 91RSVert wrote: | | Does the injector harness have numbers on them? 1,2,3,etc? |
I don't think so. I didn't mark it before I pulled it because it basically only goes on one way. |
Doesn't matter anyway. From what I've learned, the injectors are batch fired. We didn't label them when we replaced my 3.1 a couple of years ago. _________________ 92 Camaro
89 Camaro
 |
|
| Back to top |
|
 |
Twilightoptics Hardcore (12sec Club)

Joined: 13 Jan 2004 Posts: 9191 Location: Auburn , WA
1987 Chevrolet Camaro IROC-Z
|
Posted: Sat Sep 19, 2009 9:59 am Post subject: |
|
|
left side and right side. _________________ A redline a day keeps the carbon away! |
|
| Back to top |
|
 |
91RSVert Member
Joined: 16 May 2007 Posts: 2736 Location: AR
1991 Chevrolet Camaro RS
|
Posted: Sat Sep 19, 2009 1:51 pm Post subject: |
|
|
| I was wanting to know so I could build a harness out of it. Not use it as it is. |
|
| Back to top |
|
 |
|