Cascade Crew

blue89 · Posted: Mon Jun 08, 2009 9:02 am Post subject: Grey Interior

I need some grey interior pieces if anyone has some. The rear spare tire cover and the inner-upper hatch piece with the pull-cover provisions prefered (I'm not picky though).

And some gray rear seats.

90droptoproc · Posted: Mon Jun 08, 2009 12:58 pm Post subject:

I think I have everything but the seats, I will look in the next day or so

blue89 · Posted: Mon Jun 08, 2009 1:07 pm Post subject:

Thanks Rich!

90droptoproc · Posted: Mon Jun 08, 2009 1:08 pm Post subject:

d00012 · Posted: Mon Jun 08, 2009 1:38 pm Post subject:

What kind of condition do you want? I'm buying an 88 Firebird with grey interior (not the prettiest) and taking the rear seats out.

blue89 · Posted: Mon Jun 08, 2009 1:45 pm Post subject:

Just as long as they aren't water soaked and nasty. Cloth is just fine with me. Dark or light grey is preffered.

d00012 · Posted: Mon Jun 08, 2009 1:49 pm Post subject:

They aren't soaked, but it has noticeable water damage on the passenger side.

blue89 · Posted: Mon Jun 08, 2009 1:59 pm Post subject:

If you have a set of lap belts I won't care Wink

d00012 · Posted: Mon Jun 08, 2009 3:12 pm Post subject:

I don't remember if it was shoulder or lap belts. Were they all over the shoulder?

Twilightoptics · Posted: Mon Jun 08, 2009 3:22 pm Post subject:

d00012 · Posted: Mon Jun 08, 2009 3:32 pm Post subject:

I think they were installed in my 87, the headliner was cut badly.

Edit: Oh wait, no i have lap belts, and so does the Firebird. I was thinking of the driver and passenger...for some reason the headliner is cut wide. Kind of an eyesore. So yeah, you can have the lap belts.

Don't by any chance have an open element?

91RSVert · Posted: Mon Jun 08, 2009 5:43 pm Post subject:

I have a cargo role up if needed.

Al Hasse · Posted: Mon Jun 08, 2009 5:54 pm Post subject:

90droptoproc · Posted: Mon Jun 08, 2009 6:52 pm Post subject:

ya 89-92 had rear shoulder belts

d00012 · Posted: Mon Jun 08, 2009 7:37 pm Post subject:

If you have a spare open element, I'll trade the back seat and lap belts for it.

blue89 · Posted: Tue Jun 09, 2009 6:35 am Post subject:

The only one I have is for the 454 truck so it's a huge filter can. What would you like instead? I have some 2.8 brackets, alt, starters, and some other random goodies.

My chassis is an 86 so it has no brackets for the rear shoulder belts. And I guess if anyone has the rear grey quarter panel covers that would be great.

d00012 · Posted: Tue Jun 09, 2009 7:20 am Post subject:

That's ok. Aren't those filter cans the same size? Since they have the same TB as the 305/350? I swear the filter can is the same size in my dad's 454.

Anywho, since you don't have any stuff for the V8. How good is the alt? Or is that just a bracket? What other random goodies? Very Happy

blue89 · Posted: Tue Jun 09, 2009 7:56 am Post subject:

It's a carborated low rise filter housing so it goes deep and cannot be used with a 4bbl holley, only the q-jet or maybe the edelbrock. 13" element?

I'm at work now but I have all sorts of V6 stuff floating around at home. Mainly just random stuff. Snorkle intake, MAF's, bellows, EGR stuff, 3rd gen master cylinders, single in dual out muffler, manifolds, air pump, injectors, fuel rails, throttle bodies, automatic inspection cover, harmonic balancer..... all sorts of random stuff that will no longer be used.

d00012 · Posted: Tue Jun 09, 2009 8:30 am Post subject:

Oh, thought you meant the TBI filter can for the 454 truck.

blue89 · Posted: Tue Jun 09, 2009 8:42 am Post subject:

It might fit. I can check when i get home since I have a 4.3TB and 2.8TB