Cascade Crew

Twilightoptics · Posted: Sun Oct 12, 2008 4:34 pm Post subject: 2.8 VS 3.1 Injectors

Does anyone know the #/hr rating of both?

Al Hasse · Posted: Sun Oct 12, 2008 4:48 pm Post subject:

Don't know about the 2.8, but the set I acquired and had serviced for my 3.1 were tested at 40 lbs. They were all final adjusted to 42. Not sure if that was a per hour pressure or just their tested pressure.

91RSVert · Posted: Sun Oct 12, 2008 4:51 pm Post subject:

40 would be the pressure, not the lb rating.

They are both in the range of 15lbs. You can put 3.1's in a 2.8 and not have any problems at all. 2.8's into a 3.1 you MIGHT run a bit lean.

Al Hasse · Posted: Sun Oct 12, 2008 4:53 pm Post subject:

I thought 40 sounded a bit high.

iansane · Posted: Sun Oct 12, 2008 5:37 pm Post subject:

I've got a set of six brand new 3.8 injectors if you want them for cheap... Very Happy

Twilightoptics · Posted: Sun Oct 12, 2008 6:14 pm Post subject:

TGO FWIW says 15lb for the 2.8 and 17lb for the 3.1.

91RSVert · Posted: Mon Oct 13, 2008 3:56 am Post subject:

17lb is 3.4l motor.

blue89 · Posted: Mon Oct 13, 2008 8:03 am Post subject: