View previous topic :: View next topic |
Author |
Message |
scott in wa. Member
Joined: 10 Aug 2005 Posts: 660 Location: puyallup wa.
1988 Chevrolet Camaro IROC-Z
|
Posted: Thu Oct 26, 2006 7:30 am Post subject: 87 z28, 88 iroc, parts, odds and ends , going to be free |
|
|
I have a huge pile of interior pieces, in my garage.
This weekend I will be going through everything.
Black plastics for t-top car, not a whole set.
misc., engine compartment pieces as well, coil for v8 tpi
Rocker panels, etc.
We are about done with our swap, so if there is anything you guys want, let me know.
My home computer is down so I can't post pics yet.
I will be seeing what I got in these boxes this weekend. I know it’s a bunch of stuff we stripped of off the wrecked car.
So let me know, it will be all free.
I need the room so I can get my tracer milling machine running again.
Iam in south hill Puyallup.
Thanks
Scott |
|
Back to top |
|
|
Quasi-Traction "I have petals"
Joined: 24 Oct 2005 Posts: 3873 Location: stumptown
1986 Chevrolet Camaro Berlinetta
|
Posted: Thu Oct 26, 2006 10:26 am Post subject: |
|
|
I'll be intrested in all the black interior pieces behind the rear seat....pretty much everything in the hatch area....dunno If I can get up there this weekend for it. thoug _________________
|
|
Back to top |
|
|
scott in wa. Member
Joined: 10 Aug 2005 Posts: 660 Location: puyallup wa.
1988 Chevrolet Camaro IROC-Z
|
Posted: Thu Oct 26, 2006 11:20 am Post subject: sure |
|
|
Ok,
I will not throw them away yet, untill you come over.
its all going to the dump, at some point.
thanks much
scott |
|
Back to top |
|
|
Xophertony Rodeo Queen
Joined: 13 Oct 2005 Posts: 5304 Location: Portland, Oregon.
1988 Pontiac GTA
|
Posted: Thu Oct 26, 2006 11:56 am Post subject: |
|
|
do you have a driver side mirror with adjuster cable that is intact? |
|
Back to top |
|
|
scott in wa. Member
Joined: 10 Aug 2005 Posts: 660 Location: puyallup wa.
1988 Chevrolet Camaro IROC-Z
|
Posted: Thu Oct 26, 2006 12:08 pm Post subject: don't think so |
|
|
I will look when I take all this stuff out this weekend
thanks
scott |
|
Back to top |
|
|
aaron_sK Member
Joined: 23 Jan 2006 Posts: 8834 Location: Back in beautiful Tacompton
1987 Chevrolet Camaro IROC-Z
|
Posted: Thu Oct 26, 2006 12:32 pm Post subject: |
|
|
What TPI engine stuff is left over?
What shape is that coil in?
What color is the interior stuff?
Do you still have the blinker/wiper stalk from the steering column?
Thanks. |
|
Back to top |
|
|
scott in wa. Member
Joined: 10 Aug 2005 Posts: 660 Location: puyallup wa.
1988 Chevrolet Camaro IROC-Z
|
Posted: Thu Oct 26, 2006 12:42 pm Post subject: ya gota wait |
|
|
Ya gota wait till I look this weekend
thanks
scott |
|
Back to top |
|
|
aaron_sK Member
Joined: 23 Jan 2006 Posts: 8834 Location: Back in beautiful Tacompton
1987 Chevrolet Camaro IROC-Z
|
Posted: Thu Oct 26, 2006 1:27 pm Post subject: |
|
|
No problem man. |
|
Back to top |
|
|
Xophertony Rodeo Queen
Joined: 13 Oct 2005 Posts: 5304 Location: Portland, Oregon.
1988 Pontiac GTA
|
Posted: Thu Oct 26, 2006 1:51 pm Post subject: |
|
|
IF you happen to discover some non-dented TPI runners, and asdfga3 does not want them i would like them (he posted it up 1st, so he has dibbs i think).
i need both sides, so if you have a side not dented i'll take it. whichever one. i would also like a spare upper intake piece if the price is reasonable (TPI pieces i don't imagine are included in the "free" part) i am planning on porting the inside of mine and poloshing the outside (yeah, shiney) and would like to be able to drive the car around while i do it. |
|
Back to top |
|
|
scott in wa. Member
Joined: 10 Aug 2005 Posts: 660 Location: puyallup wa.
1988 Chevrolet Camaro IROC-Z
|
Posted: Mon Oct 30, 2006 8:56 am Post subject: parts |
|
|
Went through some of the stuff this weekend.
More to come.
All interior parts are blk, plastic.
1 two kick panels
2 large panels that go in back on the side, with speaker holes
3 two rocker panels
4 door sills top
5 black rubber floor mats
6 new coil used about 1 month
7 10 bolt rear end housing, no axels, 2 series carrier in but no good, 2:73
8 rear springs
9 front sway bar, solid
10 Gas tank with no fuel pump sending unit or pump
11 t-top pouch
Gone:
Steering column
tpi intake
tranny
One more pile to go through.
This stuff is free for the taking, just come and get it.
Thanks
Scott |
|
Back to top |
|
|
Twilightoptics Hardcore (12sec Club)
Joined: 13 Jan 2004 Posts: 9191 Location: Auburn , WA
1987 Chevrolet Camaro IROC-Z
|
Posted: Mon Oct 30, 2006 9:06 am Post subject: |
|
|
Anyone know if a rear end housing will fit in a third gen?
I'm interested also in the door sills and Ttop bag, and the rocker panels. |
|
Back to top |
|
|
scott in wa. Member
Joined: 10 Aug 2005 Posts: 660 Location: puyallup wa.
1988 Chevrolet Camaro IROC-Z
|
Posted: Mon Oct 30, 2006 9:17 am Post subject: ok.. |
|
|
Done,
will store these
I will take a closer look at the the condition of these tonight.
get back to you tomorrow.
Last edited by scott in wa. on Mon Oct 30, 2006 1:03 pm; edited 2 times in total |
|
Back to top |
|
|
scott in wa. Member
Joined: 10 Aug 2005 Posts: 660 Location: puyallup wa.
1988 Chevrolet Camaro IROC-Z
|
Posted: Mon Oct 30, 2006 12:33 pm Post subject: Asdfga3 |
|
|
Asdfga3
You want the coil??
its new |
|
Back to top |
|
|
Xophertony Rodeo Queen
Joined: 13 Oct 2005 Posts: 5304 Location: Portland, Oregon.
1988 Pontiac GTA
|
Posted: Mon Oct 30, 2006 12:59 pm Post subject: |
|
|
yes, a rearend will fit in a thirdgen. may have to fold down your rear seats. |
|
Back to top |
|
|
Dewey316 The Lama
Joined: 08 Jan 2004 Posts: 7295 Location: Bringing the tech
1990 Chevrolet Camaro RS
|
Posted: Mon Oct 30, 2006 1:07 pm Post subject: |
|
|
Xophertony wrote: | yes, a rearend will fit in a thirdgen. may have to fold down your rear seats. |
its a tight fit with the front pass seat, I had to tilt the front seat forward. But yes , it will fit. |
|
Back to top |
|
|
aaron_sK Member
Joined: 23 Jan 2006 Posts: 8834 Location: Back in beautiful Tacompton
1987 Chevrolet Camaro IROC-Z
|
Posted: Mon Oct 30, 2006 6:52 pm Post subject: Re: Asdfga3 |
|
|
scott in wa. wrote: | Asdfga3
You want the coil??
its new |
Yes sir. I have stuff going tomorrow morning, but the afternoon is free. What's a good time to swing by? |
|
Back to top |
|
|
scott in wa. Member
Joined: 10 Aug 2005 Posts: 660 Location: puyallup wa.
1988 Chevrolet Camaro IROC-Z
|
Posted: Tue Oct 31, 2006 5:36 am Post subject: |
|
|
Twilightoptics:
Bag looks good
3 door sills, two good The other one window rubber is bent a little
One rocker pannel, looks good, I think drivers side.
You want???
Asdfga3
I will save the coil for you, today is the big treet day, If you come by early ok I get home at 2:30pm , if not wait untill tomorrow. |
|
Back to top |
|
|
Twilightoptics Hardcore (12sec Club)
Joined: 13 Jan 2004 Posts: 9191 Location: Auburn , WA
1987 Chevrolet Camaro IROC-Z
|
Posted: Tue Oct 31, 2006 8:10 am Post subject: |
|
|
Sure I'll take em off yer hands |
|
Back to top |
|
|
scott in wa. Member
Joined: 10 Aug 2005 Posts: 660 Location: puyallup wa.
1988 Chevrolet Camaro IROC-Z
|
Posted: Tue Oct 31, 2006 8:32 am Post subject: Ok, |
|
|
I will store these for a while.
Will put them in the attic,
So if someone is going down your way.
Or if I go to the dyno I will bring them down
Are you serious about wanting that 10 bolt with no axels???
It’s a non posi carrier that’s no good; the gears are ok 2:73
It’s in my side yard
Thanks
Scott |
|
Back to top |
|
|
Twilightoptics Hardcore (12sec Club)
Joined: 13 Jan 2004 Posts: 9191 Location: Auburn , WA
1987 Chevrolet Camaro IROC-Z
|
Posted: Tue Oct 31, 2006 8:45 am Post subject: |
|
|
If I had a better way to transport it I'd say yeah. I just want to cut the bracketry off... but I may not need it anyway. So do what ya will with it
I can come get the parts no problem. |
|
Back to top |
|
|
|