Cascade Crew

chevymad · Posted: Tue Jul 05, 2005 5:32 pm Post subject: Bodywork progress.

Managed to get a little done to the truck project. Thought i'd post up a few pics.

Here's what was left of the drivers side rocker panel..

And here's what it looks like now. New inner and outer rocker, and new kick panel.

New rocker and cab corner on the drivers side..

New cab corner passenger side.. I cut my patch panel to fit where I wanted it, then hit the cab with a grinder.. and found a big patch of bondo.. sooo I had to weld it back together! LOL

Twilightoptics · Posted: Tue Jul 05, 2005 5:34 pm Post subject:

Now my passing emissions(swapping/fab exhausts) and finding wheels look like I didn't do anything compared to Mr. Productive!

Schultzy89GTA · Posted: Sat Jul 09, 2005 4:13 pm Post subject:

Way to go Bmeister. That cab is going to be good as new.

-Schultzy

chevymad · Posted: Sat Jul 09, 2005 7:12 pm Post subject:

Is that not the point? Wink

Got the passenger side rain gutter installed today. Took it off couple days ago and por 15'd everything. Then I tore the pass side rockers, and kick panel off. Got everything welded back together except the outer rocker. Need to hang the door and then fit the outer tomorrow. After that theres only a couple of small patches here and there. .and i have to start grinding/smoothing and stripping.

Schultzy89GTA · Posted: Sun Jul 10, 2005 11:36 am Post subject:

Why yes, yes it is.

-Schultzy