Cascade Crew

Twilightoptics · Posted: Mon Oct 20, 2008 5:22 pm Post subject: Extra stuff for the 9"

Been busy accumulating parts and building.

LCAR Brackets
Sway Bar Mounts
Pieces to build a tubular Torque Arm.
Line Lock/ Prob Valve

Took the old Pan Hard that Chevymad welded for me years ago and turned it into an adjustable one.

Also have a picture here of the bendage of the stock torque arm from the track weekend. The mount I built for it has been there for like some 3 years of abuse. Now it's bent. Hey, bendage = power right? The arm itself bows out towards the drivers side now instead of being straight!

Also have a picture at the end of a set of headers I built for an Arnolt Bristol. Picture below is the kind of car I'm workin on. Originally came with a 4cyl and 4 exhaust pipes. Now it's got a 360 horse Vette SBC with mechanical fuel injection. Customer wanted to have 4 exhaust pipes again so it's a 2 into 1 header design built from scratch (save the flanges were purchased). 2 1/4" exhaust. It's going to be the same flow as dual 4"!!!! I can't wait to hear it.

Schultzy89GTA · Posted: Mon Oct 20, 2008 6:00 pm Post subject:

ohhhh pretty red paint Thumbs up

Looking good Paully.

-Schultzy

aaron_sK · Posted: Mon Oct 20, 2008 6:08 pm Post subject:

Wow Paul, that little green thing must fly with an SBC in it. Shocked

Kage87Z · Posted: Tue Oct 21, 2008 8:23 am Post subject:

As for me, I'm green with envy.