Cascade Crew

iansane · Posted: Thu Dec 27, 2007 3:47 pm Post subject: TP issue...

So since there are a few other topics on tuning I'll toss one in. I've been datalogging with datamaster and using ve_master to adjust the part throttle fueling to see what that does. And it seems to reel in the blms greatly.

Now that I am trying to look at how different bins look tunerpro seems to be annihilating the inputs. If I just look at a specific bin it's fine but when I hit the compare button with another bin set up I get completely random numbers all across the board. I thought it was a corrupt bin so I reloaded them and it does the same thing. Ideas?

Dewey316 · Posted: Thu Dec 27, 2007 3:53 pm Post subject:

how is the comparison set? If it is set to the show the diffrence between them, then you will see stuff like that.

For example, in a cell one bin has 46, the other has 42, the compare will show 4. That is my first thought.

Have any screen shots?

--John

iansane · Posted: Thu Dec 27, 2007 4:16 pm Post subject:

Wow.

I feel smart.

Laughing

Thanks John. I didn't even think to look in the toolbox thing.

iansane · Posted: Thu Dec 27, 2007 8:13 pm Post subject:

But I do have a screenshot on this.

Does that look okay? Or normal at all? I don't really know what's good, but that looks real steep. BLMs are good but I don't really know where to go from here on messing with the spark tables. One of which has an incredible dip from about 2k to 4.5k...

blue89 · Posted: Fri Dec 28, 2007 8:57 am Post subject:

what does your upper table look like?

iansane · Posted: Sat Dec 29, 2007 7:11 am Post subject:

Dis.