Cascade Crew

kurfbird · Posted: Sat Aug 18, 2007 2:50 pm Post subject: 3.1 v6 Saga Continues

Okay put the new motor in the car

Figured it had a bad intake gasket and replaced that. Started it up this morning.

Has no power I even brought a set of aftermarket injectrors I beleive there are 19 Lbs and it runs better but no power.

There is collant bubbles in the Antifreeze reservior with the cap on.
ALso white steam comes from the exhaust the Cat. The car was only down for a cople of days and

Did a compression test came up with 135-150 PSI

The white steam and bubbles in the radiator makes me think that I have a bad head gasket.

Give me some ideas. I am really tired of this car.

Twilightoptics · Posted: Sat Aug 18, 2007 3:20 pm Post subject: Re: 3.1 v6 Saga Continues

kurfbird · Posted: Sat Aug 18, 2007 6:08 pm Post subject: 3.1 saga

It was fully warmed up. Still bubbles in radiator

Got them off TGO for 50.00 for 8 injectors. I think mine are shot.

I applied compressed air to each cylinder and # 4 cyl made the radiator water level overflow the radiator. So its probably a head gasket. D&*^m

Twilightoptics · Posted: Sat Aug 18, 2007 6:17 pm Post subject:

Yup. Still way too much fuel though.

kurfbird · Posted: Sat Aug 18, 2007 8:24 pm Post subject: injectors

I will probably try my stock ones when I replace the head gasket. Probably cuaisng all my problems in the first place.