Cascade Crew

Quasi-Traction

Following items are for sale. Make offers, I want them gone.

2.8L V6 wiring harness out of my 84 Sport Coupe. ECM not included.

Stock Delco 6x9 Speakers out of my 86, In good working order when removed.

2.8L Computer controled "VeraJet" Rochester. Completely Rebilt in April 06', Has had 20 miles run on it since then. Will also work in S-10 and Blazers.

Two sets of Perimeter Bolt Valve covers, One is stock GM, other is Aftermarket chrome. One set of bolts and retainers included.

Stock Computer Controled Distributor out of my 86 Berlinetta. Shaft has little end play, and Extra Cap with brass terminals included.

Headlight Switch for Camaro. Also in good working shape. Removed out of my 84 Sport Coupe and stored indoors.

V6 Manual Transmission Crossmember. Will need new transmission mounts. Bolts included.

5 speed hydraulic petal setup. Includes: 2x Neutral Safety Switches that work, Brake light switch, petal covers, Upper console boot, 2x exhaust hangars, Torque arm mount, Hydraulics (May need new slave, bleeder valve leaks). I'll include the crossmember if you would like.

86/87 High Center Mount Brake light. All hardware included. Was in working shape when removed.

333882 SBC cylinder heads. 76cc chambers, 1.94/1.50 valves. Ready to drop in and go. Valve covers and pushrods included.

83Z28BlackBetty · Posted: Tue Jul 03, 2007 12:53 pm Post subject:

how much do you want for the shiny valve covers? Me thinks I need some. plus it would give me an excuse to pull mine and figure out what kind of heads i have.

~JAKE

Quasi-Traction · Posted: Tue Jul 03, 2007 12:57 pm Post subject:

how about $5 and shipping cost? Do you want just the chrome ones or both?

aaron_sK · Posted: Tue Jul 03, 2007 7:34 pm Post subject:

Do you have the console shift plate too, or just the boot?

Quasi-Traction · Posted: Tue Jul 03, 2007 11:17 pm Post subject:

I have the plate but one of the mounting tabs is busted off, right by the ash tray.

aaron_sK · Posted: Tue Jul 03, 2007 11:26 pm Post subject:

Any pics of the damaged section?

Quasi-Traction · Posted: Wed Jul 04, 2007 12:43 pm Post subject:

I'll take some a little later today.

aaron_sK · Posted: Thu Jul 12, 2007 8:16 pm Post subject:

Chris, still got that plate? I'm tired of looking at my trans tunnel.

Quasi-Traction · Posted: Fri Jul 13, 2007 9:59 am Post subject:

Doh! Sorry to leave you hanging dude.

I dug and dug around for the plate....can't find it. I think I might have either stuffed in the old 85 Z28 I had when I sold it or thrown it out.

For some reason I saved the boot though? Confused

aaron_sK · Posted: Fri Jul 13, 2007 1:46 pm Post subject:

All good man.

How about a price shipped for the boot and that big pile of wires in the first pic?

Quasi-Traction · Posted: Fri Jul 13, 2007 3:37 pm Post subject:

I'll check tomorrow.....

I cant Imagine it'd be much more than $15 with shipping.

Quasi-Traction · Posted: Sat Jul 14, 2007 10:55 am Post subject:

aaron,

you have a PM.