Cascade Crew

chevymad · Posted: Sat Nov 25, 2006 5:47 pm Post subject: Did some powder coating

While the car is down, I decided i'd clean up and re-powder coat the punch amp. It was severely corroded. So bad that even after sand blasting, acid etching and pre-baking it still bubbled the coating. Looks much better though. I also repaired a bad transistor in an old Patriot 400watt amp I had. Coated it as well. Going to put both of them back in the formy.

The color is a translucent blue with heavy metallic and pearl, shot over a silver base. I like the look even better without the flash. Didn't realize how much of the powder was floating around, my hair and face were totally glittered with the metallic.

chevymad · Posted: Sat Nov 25, 2006 7:53 pm Post subject:

Got the patriot together.. that blue looks waay too bright with the flash.. this pic is closer.

izcain · Posted: Sat Nov 25, 2006 8:45 pm Post subject:

That looks good man! are you powercoating other things to match that as well?

iansane · Posted: Sat Nov 25, 2006 9:24 pm Post subject: Re: Did some powder coating

chevymad · Posted: Sat Nov 25, 2006 9:25 pm Post subject:

Havent thought of anything else to do that color. I have lots of black chrome powder on my car though. And the car itself is a dark blue pearl metallic.

I'm slowly accumulating colors too. I now have silver, black chrome, blue, mirror red, chevy orange, chassis black, and clear.

chevymad · Posted: Sat Nov 25, 2006 9:27 pm Post subject: Re: Did some powder coating