| View previous topic :: View next topic |
| Author |
Message |
scott in wa. Member
Joined: 10 Aug 2005 Posts: 660 Location: puyallup wa.
1988 Chevrolet Camaro IROC-Z
|
Posted: Wed Jun 07, 2006 8:03 am Post subject: 1987 z28 parts CHEAP |
|
|
We are doing a swap from this 87z8, into an 88 convertible.
Have a few nice parts
car was or is blk on blk
Ttops good shape=====================sale pending
700r4 tranni out of an 88 tbi running in car=====sale pending
TPI intake, plenum, runners, fuel rail, New holley adjustable regulator its a year old(no throatle body) good shape. this is a package only
Brand new, EGR valve, still looks new it bolts to the TPI intake under plenum. MAKE OFFER ONE YEAR OLD
Two custom Camaro seats out of the 88 iroc, he likes the ones in the 87z better, but these are the factory cutom Iroc seats. Make me an offer.
1 Year old radiator
silver ground effects, good condition z28 badging
Good set of hood louvers
Rear hatch with glass
Dash, no dash top,
Gages to 88 305 v8 tbi car 120 speedo set
Drivers side door no glass with one ding in door.
Pasanger side door smashed up, good glass and window regulator and motor
88 305 tbi with harness and computer currently running and in car minus serpentine belt set up.
Seat belts for the 87 z28 black
rear-end out if the 88 maybe 2:73's non posi ??
Heater box
Air cond stuff
Brake master cylinder/ boster system
Gas tank
drivline most everything on the car..
Rear bumper with tpi injection badging
silver ground effects, good condition z28 badging
Tail lights
misc, stuff we are not going to put into the 88 convertible
Misc black interior pieces
so and so on.
Let me know what you want I will see if we have it.
We will pull parts.
PM me and make me an offer.
I realy don't know what this stuff is worth so make me an offer
Iam going to post this stuff on craigs list soon, as we pull them
then the car go to death row.
Iam in Puyallup wa.
Scott[/b]
Last edited by scott in wa. on Tue Jun 13, 2006 9:48 am; edited 24 times in total |
|
| Back to top |
|
 |
aaron_sK Member
Joined: 23 Jan 2006 Posts: 8834 Location: Back in beautiful Tacompton
1987 Chevrolet Camaro IROC-Z
|
Posted: Wed Jun 07, 2006 12:51 pm Post subject: |
|
|
What condition are the T-Tops in, and how much?
Also, does it have electric mirrors? |
|
| Back to top |
|
 |
Twilightoptics Hardcore (12sec Club)

Joined: 13 Jan 2004 Posts: 9191 Location: Auburn , WA
1987 Chevrolet Camaro IROC-Z
|
Posted: Wed Jun 07, 2006 1:03 pm Post subject: |
|
|
I would like the drivers seat belt female buckle.
Also the I believe passenger side interior piece that covers the rear seatbelt on the side. It goes from the door pane to the seatbelt pull.
Also... did this have the 3rd breaklight in spoiler? If so I would like the black interior piece that is attached to the hatch housing under the spoiler. |
|
| Back to top |
|
 |
Xophertony Rodeo Queen

Joined: 13 Oct 2005 Posts: 5306 Location: Portland, Oregon.
1988 Pontiac GTA
|
Posted: Wed Jun 07, 2006 1:14 pm Post subject: |
|
|
is it a delay column? as in wiper delay? if everything works i would be interested in the column. also the passanger side female buckle .
this was not a factory radio delete car was it? i am on the lookout for rear black plastics without speaker holes for the v6 car. |
|
| Back to top |
|
 |
aaron_sK Member
Joined: 23 Jan 2006 Posts: 8834 Location: Back in beautiful Tacompton
1987 Chevrolet Camaro IROC-Z
|
Posted: Wed Jun 07, 2006 1:17 pm Post subject: |
|
|
| When were there speaker holes cut in the plastic? Was that a Pontiac thing? |
|
| Back to top |
|
 |
Twilightoptics Hardcore (12sec Club)

Joined: 13 Jan 2004 Posts: 9191 Location: Auburn , WA
1987 Chevrolet Camaro IROC-Z
|
Posted: Wed Jun 07, 2006 1:24 pm Post subject: |
|
|
| Xophertony wrote: | is it a delay column? as in wiper delay? if everything works i would be interested in the column. also the passanger side female buckle .
this was not a factory radio delete car was it? i am on the lookout for rear black plastics without speaker holes for the v6 car. |
How come you don't want speakers? 6x9 in the back rock! |
|
| Back to top |
|
 |
Quasi-Traction "I have petals"

Joined: 24 Oct 2005 Posts: 3873 Location: stumptown
1986 Chevrolet Camaro Berlinetta
|
Posted: Wed Jun 07, 2006 2:25 pm Post subject: |
|
|
Might be intrested in the Gauge cluster....is it a 110mph or 145mph? _________________
 |
|
| Back to top |
|
 |
83Z28BlackBetty Bam-Ba-Lam

Joined: 13 Mar 2006 Posts: 2083 Location: Aloha
1983 Chevrolet Camaro Z/28
|
Posted: Wed Jun 07, 2006 7:54 pm Post subject: |
|
|
I could use the male seat belts if they are available. I need both sides _________________ 1983 Z-28 5.7 LT1, T56, Headman headers, BW 9 Bolt Posi Disc, WS6 suspension
 |
|
| Back to top |
|
 |
chevymad Master B
Joined: 11 Jan 2004 Posts: 5476
1987 Pontiac Formula
|
Posted: Wed Jun 07, 2006 8:58 pm Post subject: |
|
|
| How much for the 700r4? |
|
| Back to top |
|
 |
Xophertony Rodeo Queen

Joined: 13 Oct 2005 Posts: 5306 Location: Portland, Oregon.
1988 Pontiac GTA
|
Posted: Wed Jun 07, 2006 9:00 pm Post subject: |
|
|
on factory radio delete cars (camaro or firebird) there were NO cut outs in the sail pannals for speakers. so you did not need those cloth sail pannal covers, it was just solid plastic. i don't know about the dash pads. i have never seen one without speaker holes. it was a long shot but i thought i would ask.
the reason i do no want "rockin 6X9s" is because the radio i had was a piece of garbage, and my speakers were all factory, so i decided to gut it all out. (this is on the V6 car) i am trying to make it as light as posable for gas mialage purposes. so far i have cut 15LBS of the front/middle of the car with the air injection system and speakers. i also plan on pulling atleast one of the rear seats. and i will be putting the 2002 cavalier front seats (realy light) in there once i get seats for the GTA. i do not yet know what else i plan on removing. |
|
| Back to top |
|
 |
aaron_sK Member
Joined: 23 Jan 2006 Posts: 8834 Location: Back in beautiful Tacompton
1987 Chevrolet Camaro IROC-Z
|
Posted: Wed Jun 07, 2006 9:15 pm Post subject: |
|
|
Wierd. My sail panels are cloth.  |
|
| Back to top |
|
 |
Xophertony Rodeo Queen

Joined: 13 Oct 2005 Posts: 5306 Location: Portland, Oregon.
1988 Pontiac GTA
|
Posted: Wed Jun 07, 2006 9:27 pm Post subject: |
|
|
on any car that originaly came with a radio they will be cloth. so yours are most likley cloth. however on some RARE cars with full factory radio delete there will be no holes for the speakers on the rear interior plastics.
another thing to keep in mind, there are two leveles of factory radio delete. the first level just had a plate where the deck would be, and the antenna and speakers remained, these radio delete cars will have sail pannal covers. on the ultra rare full-factory radio delete cars (they do exist) there will be no holes for speakers in the rear sail pannal plastics.
the RPO for the partial radio delete is: UL5
the RPO for the full radio delete is: .........
........ well upon searching for it just now i can't find any RPOs. perhaps there is only one RPO and the level of radio delete chainged through the years. i know these plastics exist i have seen pictures... i am going to do more reasearch and report back. |
|
| Back to top |
|
 |
83Z28BlackBetty Bam-Ba-Lam

Joined: 13 Mar 2006 Posts: 2083 Location: Aloha
1983 Chevrolet Camaro Z/28
|
Posted: Wed Jun 07, 2006 9:38 pm Post subject: |
|
|
also does it have silver/grey badges? I need some bad!
thanks, ~JAKE _________________ 1983 Z-28 5.7 LT1, T56, Headman headers, BW 9 Bolt Posi Disc, WS6 suspension
 |
|
| Back to top |
|
 |
scott in wa. Member
Joined: 10 Aug 2005 Posts: 660 Location: puyallup wa.
1988 Chevrolet Camaro IROC-Z
|
Posted: Thu Jun 08, 2006 4:57 am Post subject: parts |
|
|
Ttops are good except, there you will need a new trim piece for the drivers side, there is a 2.0 inch piece broke off.
How about $25.00
This is no 3rd brake light in the rear spoiler
seat belt? I will look tonight. both halfs must go, $20.00
Delay colmn,
It does have delay wipers if that what you mean, they did work.
The delay plastic handle is cracked.
Whole column, $ 40.00
The 700r4 that in the 88, 305tbi car, when it is pulled $50.00
there are speaker holes in panels
ALSO ADDED MORE STUFF
MAKE ME AN OFFER ON WHAT YOU WANT.
Thanks
scott
Yes it has siver/gray badges. |
|
| Back to top |
|
 |
aaron_sK Member
Joined: 23 Jan 2006 Posts: 8834 Location: Back in beautiful Tacompton
1987 Chevrolet Camaro IROC-Z
|
Posted: Thu Jun 08, 2006 7:18 am Post subject: |
|
|
| PM me your street address, and a good time to come out and look at the T-tops. I live right over in Tacoma, so it's no problem. |
|
| Back to top |
|
 |
scott in wa. Member
Joined: 10 Aug 2005 Posts: 660 Location: puyallup wa.
1988 Chevrolet Camaro IROC-Z
|
Posted: Thu Jun 08, 2006 8:35 am Post subject: ok, will do |
|
|
| Ok, pmed you |
|
| Back to top |
|
 |
Twilightoptics Hardcore (12sec Club)

Joined: 13 Jan 2004 Posts: 9191 Location: Auburn , WA
1987 Chevrolet Camaro IROC-Z
|
Posted: Thu Jun 08, 2006 9:09 am Post subject: |
|
|
| Sorry dude, just need the one half of the seatbelt which I can get for $5 at the JY. Planned on making a trip out there tomorrow for some stuff for my brothers car. |
|
| Back to top |
|
 |
scott in wa. Member
Joined: 10 Aug 2005 Posts: 660 Location: puyallup wa.
1988 Chevrolet Camaro IROC-Z
|
Posted: Thu Jun 08, 2006 9:31 am Post subject: seat belts |
|
|
Twilightoptics
Let me re-post to the parts you want.
Ok....
I didn't relalize it was you, among others that sent me those files to get that thing going a year or so ago.
If I have them they are yours FREE....
Sorry for the confusion on my part.
Is there anything else you want or need????
Iam not sure if I have them but will look tonight
Could you explain again what you want?
Pm me On my address and a time when you would be buy.
Also to all crew members, shoot if you don't like the price let me know,
I want to get rid of this car now...
Like I said MAKE ME OFFERS ON THE PARTS YOU WANT.
scott
PS, Motor and tranny are coming out this weekend |
|
| Back to top |
|
 |
chevymad Master B
Joined: 11 Jan 2004 Posts: 5476
1987 Pontiac Formula
|
Posted: Thu Jun 08, 2006 5:21 pm Post subject: |
|
|
| I'll take the 700. I hope to be putting an OD in my truck this weekend, if all goes well after that I can come get the trans. Let me know when its ready so we can set up a pickup time. |
|
| Back to top |
|
 |
Faded Member
Joined: 07 Apr 2006 Posts: 38 Location: Missoula, MT
|
Posted: Thu Jun 08, 2006 9:47 pm Post subject: |
|
|
| I need the black interior piece that sits between the headliner and the hatch. Do you have one in good shape without the cutout for the third brake light? |
|
| Back to top |
|
 |
|