View previous topic :: View next topic |
Author |
Message |
aaron_sK Member
Joined: 23 Jan 2006 Posts: 8834 Location: Back in beautiful Tacompton
1987 Chevrolet Camaro IROC-Z
|
Posted: Sun Jun 23, 2013 7:16 am Post subject: Seat belt recievers |
|
|
I need the old-school type with the GM logo button on the side, not the later recall-style ones with the red button on top.
Front pair only. Color and style (obviously) not important. |
|
Back to top |
|
|
Alphius Peanut
Joined: 05 Sep 2006 Posts: 2429 Location: Grand Mound
1984 Chevrolet Camaro Z/28
|
Posted: Mon Jun 24, 2013 2:11 pm Post subject: |
|
|
Never seen that style in a thirdgen. I'll keep an eye out though. Even my '84 has the red button on top style receivers. Are your belts even from a thirdgen?
How about getting a whole new set of belts like a thinking gentleman? _________________ 84 Camaro Z28 - LS1/T56
85 Silverado - Low and Slow |
|
Back to top |
|
|
aaron_sK Member
Joined: 23 Jan 2006 Posts: 8834 Location: Back in beautiful Tacompton
1987 Chevrolet Camaro IROC-Z
|
Posted: Mon Jun 24, 2013 2:17 pm Post subject: |
|
|
I believe they came in '82 and possibly '83.
Because I have no center console I will be fine with the receivers from an Elco or Caprice or anything like that.
I think the belts I have came from an '82 because they have the single retractor and the old-style tang. I found them in the trunk of the Bondomaro when I bought it.
I despise dual retract setups, so my options are to use these or go LT1 and I already have these so... |
|
Back to top |
|
|
Alphius Peanut
Joined: 05 Sep 2006 Posts: 2429 Location: Grand Mound
1984 Chevrolet Camaro Z/28
|
Posted: Mon Jun 24, 2013 2:25 pm Post subject: |
|
|
Cheerio. I'll see if that '82 Berli is still there next time I head out. Or if I can find a set from any old GM boat. _________________ 84 Camaro Z28 - LS1/T56
85 Silverado - Low and Slow |
|
Back to top |
|
|
aaron_sK Member
Joined: 23 Jan 2006 Posts: 8834 Location: Back in beautiful Tacompton
1987 Chevrolet Camaro IROC-Z
|
Posted: Mon Jun 24, 2013 8:21 pm Post subject: |
|
|
Well know I don't know what to think about these. I decided I should maybe pull them out and actually take a look at them (what a thought).
They are certainly not the old-school wide type. They look like a thirdgen buckle but they do not fit into a thirdgen receiver. They have a single retractor which fits into the roof, so they're definitely correct for the car.
I may just make a template and go down to the yard to see if I can match something up. |
|
Back to top |
|
|
Alphius Peanut
Joined: 05 Sep 2006 Posts: 2429 Location: Grand Mound
1984 Chevrolet Camaro Z/28
|
Posted: Tue Jun 25, 2013 7:59 am Post subject: |
|
|
Maybe they are 4thgen belts without the plastic cover? _________________ 84 Camaro Z28 - LS1/T56
85 Silverado - Low and Slow |
|
Back to top |
|
|
|