Cascade Crew

91camaro_rs · Posted: Thu Jun 14, 2012 4:46 pm Post subject: ecm/ prom help please

Ok so i have the 7730 ecm speed density tuned port. I have a 91 305 prom but i have the Aujp chip on it. About every 2-3 weeks the prom fails code 51. Am i doing something wrong when i burn the chip or is my ecm bad? This is like the 4th time its happened

aaron_sK · Posted: Thu Jun 14, 2012 7:56 pm Post subject:

Same chip every time?

91camaro_rs · Posted: Thu Jun 14, 2012 10:05 pm Post subject:

Two different ones. Think maybe the chip is done?

Twilightoptics · Posted: Thu Jun 14, 2012 10:17 pm Post subject:

Chip is kinda dumb. Never heard one "go bad" over time of use. Excess of burns yeah, or just stops yeah. But never I burned it and it was fine for a month.

I'd be leaning ECM.

Which chips are you using?

You try removing and reinstalling the chip/adapter etc and key on again? Eliminate bad connnection?

91camaro_rs · Posted: Thu Jun 14, 2012 10:45 pm Post subject:

im using the SST 27S512 chips. i ordered a new ecm tho so gonna swap that out in the morning

i swapped to another chip with the aujp on it and it worked but that chip that i swapped was the one that went bad on the dyno, so im thinkin ecm now

Twilightoptics · Posted: Fri Jun 15, 2012 8:44 am Post subject:

I never had luck even getting those sst chips to work. The Atmel chips I had worked great.

91camaro_rs · Posted: Fri Jun 15, 2012 2:20 pm Post subject:

where abouts do i get the atmel chips at?

Al Hasse · Posted: Fri Jun 15, 2012 2:36 pm Post subject:

They're obsolete and discontinued. I have one or two of Paul's that I need to return to him, since I don't need chips any more.

91camaro_rs · Posted: Sat Jun 16, 2012 8:20 am Post subject:

there is some on ebay. run about $7 a piece, worth it?

RSFreak · Posted: Sat Jun 16, 2012 12:04 pm Post subject: